Part Low/West

1410 Adaptive Tune 116 DIN Controller --

* Adaptive & auto tune

* IP 65 front panel shield

* Front panel configurability

* One output standard, two optional plus communications available

* Outputs plug-in for easy setup/change

* Universal inputs (RTD, T/C & analog); front panel selectable

* Full PID Heat/Cool capability

* Universal power supply

* Loop break alarm

* Analog re transmission (recorder output)

* Inputs: Thermocouple Types: J, K, R, S, T & B; RTD: PT 100 (3850 ppm); Current: 4-20mA, 0-20mA; Voltage: 0-50mV, 10-50mV, 0-5V, 1-5V, 0-10V

* Outputs: EMR: SPDT 2A resistive @ 120/240VAC; DC Trigger: 4.3VAC into 250ohm min.; Analog: 10 Bit resolution, 0-20mA, 4-20mA, 0-5V, 0-10V selectable

* Accuracy: ±0.25% of span ±1LSD

* Supply Voltage: 90-264VAC @ 50/60Hz

* 3-year warranty


2000 Series Microprocessor-Based Single and Two Loop PID Controllers

* Vacuum-fluorescent display prompts for recalibration, tuning, programming and operation

* Color-coded alarm, output and mode words built into the display permit instant status review at all times

* Input Selection: Any thermocouple listed below with internal linearization (for other thermocouples contact Inotek); RTD Sensor -- 100 Ohm, .00385 PPM, Platinum. Select 1° or 0.1°; Any DC voltage including process voltage signals; Any DC current including process current signals

* Control Selection: ON/OFF control with selectable dead band and solid-state relay output(s); 3 Mode Time proportional control with fully selectable cycle time and PID parameters and solid-state relay output(s); 3 Mode Analog control output(s) with fully selectable PID parameters

* Internal lithium battery protects memory during power OFF and power loss conditions

* Flame retardant UL rated ABS plastic case fits ¼ DIN cutout with mounting bracket. Polycarbonate flame retardant bezel. Screw terminals at rear. Slide-out assembly with plug-in circuit boards

* Accuracy: ±0.2% of T/C range shown below

* Thermocouples: (maximum ranges shown)
J-300/+1400F-185/+760C
K-340/+2480F-207/+1360C
R+200/+3200F+ 90/+1760C
S+32/+3180F0/+1750C
T-380/+740F-230/+ 390C
N-200/+2300F-130/+1260C
E-180/+1610F-115/+870C
B+600/+3260F+310/+1790C
Platinel II-140/+2500F-95/+1375C
Ni/Ni 18% Moly0/+2390F-15/+1310C
W5 Re/W26 Re+32/+3260F0/+2315C
W3 Re/W25 Re+32/+3260F0/+2370C
W/W26 Re+200/+3260F+ 94/+2315C


Home   |   Company Overview   |   Product Line

W.E.I. Inc.
107 Baker Street
Syracuse, New York 13206
Phone: 315.437.4281
Fax: 315.437.4296
E-Mail: wei@traknet.com